Sale!

WINDMILL (DB-400) 400W 12V Wind Turbine Generator kit residential, agriculture & marine. Built in MPPT charge controller + automatic and manual breaking system & volt meter. DIY installation providing off-grid green energy power.

$699.00 (as of 21st February 2018, 7:52 am) $399.00

✅ FEATURES: Made for both land and marine. Integrated automatic braking system to protect from sudden and high wind speed. Easy DIY installation methods with all materials provided. Can be used in conjunction with solar panels. MPPT Maximum power point tracking built into the wind turbine generator. Made with high quality Polypropylene and Glass Fiber material with a weather resistant seal.
✅ PROTECTION AGAINST: Salt water corrosion, UV protection coating, Sudden voltage surge and wind gust, high wind speeds with integrated automatic braking system + manual braking switch and over charging of battery.
✅ SPECIFICATION: Rated power: 400W, Rated speed: 46 ft/s, Voltage system: 12V, Cut-in wind speed: 6.7mph, Suggested battery capacity: 50A or larger, Number of blades: 3, Rotor diameter: 4 ft and Light weight: 16,75 lb.

Usually ships in 24 hours

Category:

Description

WindMill 400W Wind Turbine

The 400W wind turbine is our economy level wind turbine, made specifically for off-grid residential use in mind. Its DIY set-up instructions and with all of the materials needed provided for, it is possible for you to to set the wind turbine up very quickly at all. The 400W wind turbine is durable, low maintenance and the lightest wind turbine in our line up of wind turbine having weighing at only 16.8 lbs. Coated with special high weather tolerant protection spray to offer protection to the wind turbine from the elements such as rain and salt water from the sea. This can be a completely self-sustaining stand-alone device that will frequently generates 100% clean GREEN renewable energy, without you being present or around it. The Charge Controller of the 400W wind turbine is built within the wind turbine itself. The Charge Controller is specially designed for each individual wind turbine, the special design lets you get the most power out of the wind turbine as well as to offer protection to your wind turbine from overcharging.

SPECIFICATION:

  • Rated power: 400W
  • Rated speed: 46 ft/s
  • Voltage system: 12V
  • Cut-in wind speed: 6.7mph
  • Suggested battery capacity: 50A or larger
  • Number of blades: 3
  • Rotor diameter: 4 ft
  • Light weight: 16,8 lbs.

INCLUDES:

  • 1 x Center piece + tail (including generator + MPPT)
  • 3 x Blades
  • 1 x Nose cone
  • 1 x Manual brake switch + voltmeter display box
  • 9 x Hex bolts (Large)
  • 2 x Hex bolts (Small)
  • 1 x Hex key
  • 11 x Nuts
  • 20 x Washers
  • 1 x Unilateral open wrench
  • 1 x Operational installation manual

WARRANTY: 1 Year manufactures warranty.
✅ FEATURES: Made for both land and marine. Integrated automatic braking system to offer protection to from sudden and high wind speed. Easy DIY installation methods with all materials provided. Can be utilized together with solar panels. MPPT Maximum power point tracking built into the wind turbine generator. Made with top of the range Polypropylene and Glass Fiber material with a weather resistant seal.
✅ PROTECTION AGAINST: Salt water corrosion, UV protection coating, Sudden voltage surge and wind gust, high wind speeds with integrated automatic braking system + manual braking switch and over charging of battery.
✅ SPECIFICATION: Rated power: 400W, Rated speed: 46 ft/s, Voltage system: 12V, Cut-in wind speed: 6.7mph, Suggested battery capacity: 50A or larger, Number of blades: 3, Rotor diameter: 4 ft and Light weight: 16,75 lb.
✅ INCLUDES: 1 x Center piece + tail (including generator + MPPT), 3 x Blades, 1 x Nose cone, 1 x Manual brake switch + voltmeter display box, 9 x Hex bolts (Large), 2 x Hex bolts (Small), 1 x Hex key, 11 x Nuts, 20 x Washers, 1 x Unilateral open wrench and 1 x Operational installation manual.
✅ WARRANTY: 1 Year manufactures warranty.

Additional information

Binding

Brand

Color

EAN

EANList

ItemDimensions

Label

Manufacturer

Model

MPN

PackageDimensions

PackageQuantity

PartNumber

ProductGroup

ProductTypeName

Publisher

Size

Studio

Warranty

Reviews

There are no reviews yet.

Be the first to review “WINDMILL (DB-400) 400W 12V Wind Turbine Generator kit residential, agriculture & marine. Built in MPPT charge controller + automatic and manual breaking system & volt meter. DIY installation providing off-grid green energy power.”

Your email address will not be published. Required fields are marked *